New products AQMs Mobile monitoring VOCs Particle composition Air samplers VOCs pollution sources CEMs Sampling and analysis Mercury Cooking fume Automobile exhaust Site dust monitoring Water quality Calibrators and lab Agents
New products
AQMs
Mobile monitoring
VOCs
Particle composition
Air samplers
VOCs pollution sources
CEMs
Sampling and analysis
Mercury
Cooking fume
Automobile exhaust
Site dust monitoring
Water quality
Calibrators and lab
Agents
Th-600e intelligent smoke sampler
Th-600e intelligent smoke sampler
Product Description:


Consult Now Introduction
Product Description

The products meet the requirements of HJ 547-2017 iodimetric method for the determination of chlorine in waste gas from stationary sources; GB / T 16157-1996 determination of particulate matter and sampling method of gaseous pollutants in exhaust gas from stationary sources; HJ / T 397-2007 technical specification for monitoring waste gas from stationary sources; and HJ / T 47-1999 technical conditions for flue gas sampler.

Features
  • It has novel design, compact structure and higher integration;
  • The instrument is operated by touch screen, the interface is clear and beautiful, and the operation is simple and clear, which is convenient for customers to use;
  • The device has the function of heating and constant temperature, and the constant temperature can be set within the range of 110 ~ 150 ℃;
  • With the brushless vacuum inlet pump, the sampling flow rate is wider, the no-load flow rate can reach 2.5l/min, and the flow rate can still be higher than 1.5l/min when the system load is - 20KPa;
  • The proportional control valve is used to control the flow, so that the constant current is more stable;
  • High power electric heating wire is used to heat the sampling pipe to avoid the formation of condensed water in the sampling pipe;
  • The instrument has the function of automatic leak detection to ensure the reliability of sampling;
  • Electronic flowmeter version or manual flow regulation version can be selected for two-way gas sampling;
  • The calibration data can be backed up and restored to prevent the instrument from operating normally due to incorrect calibration operation;
  • It can accurately measure atmospheric pressure, ambient temperature, flue gas velocity and other parameters, with high measurement accuracy;
  • The instrument is equipped with ice water bath incubator as standard. Four absorption bottles can be built in, which can meet the requirements of national standard hj547-2017. Moreover, the incubator can be heated or cooled by itself, so it is more flexible to use;
  • The instrument is equipped with chlorine sampling gun as standard, with filter membrane clamp installed at the front end, and quartz filter membrane can be installed to retain particles, meeting the requirements of national standard hj547-2017;
  • The instrument can also be equipped with ordinary smoke sampling gun to sample other flue gas components.


Scope Of Application

Th-600e intelligent flue gas sampler is a kind of sampling device that uses sampling membrane and absorption liquid to collect chlorine gas in fixed pollution sources. According to relevant standards, other cigarette guns can be selected to sample gaseous pollutants in the waste gas of other fixed pollution sources. This machine is mainly used for environmental monitoring, health and epidemic prevention stations, industrial and mining enterprises, scientific research institutes and other departments on the spot sampling of waste gas from fixed pollution sources.

© 2020 武汉天虹环保产业股份有限公司 鄂ICP备123456789号